Tuotteet

Mayfield Kallotelineet

Laaja valikoima Mayfield -kallotelineitä sekä aikuis- että lapsipotilaille erilaisiin kirurgisiin toimenpiteisiin, joissa potilaan kallon stabilointi on tarpeen.

Integra LifeSciences Sales
MAYFIELD 2000 Skull Clamp
The MAYFIELD® 2000 Skull Clamp (REF A-2000) is designed to give rigid skeletal fixation and allow the surgeon more freedom in positioning the fixation pins. Avoidance of critical areas of the skull is made possible by a swiveling rocker arm which rotates 360 degrees making application much easier. The swiveling rocker arm can in addition rotate 360 degrees under full skeletal pressure making final positioning after pin impingement much easier. Its lean body design also allows for greater exposure to the operative sight.
Integra LifeSciences Sales
MAYFIELD Adult Horsehoe Headrest
The MAYFIELD® Swivel Horseshoe Headrest A-1011 and A-1012 are designed for the prone and supine positions. The MAYFIELD Ultra Base Unit (REF A-2101) and the MAYFIELD Ball Socket Swivel Adaptor (REF A-1064) are required when using the A-1012 MAYFIELD Swivel Horseshoe Headrest. No swivel adaptor is required for the A-1011 MAYFIELD Horseshoe Headrest. This system permits both lateral and vertical mobility for positioning the patient’s head.
Integra LifeSciences Sales
MAYFIELD Ball Socket Swivel Adaptor
The MAYFIELD® Ball Socket Swivel Adaptor (REF A-1064) is designed to provide greater flexibility in positioning the patient’s head by allowing rotation in 360 degrees. The MAYFIELD Ultra Base Unit (REF A-2101) with its Transitional Member is required when using the MAYFIELD Ball Socket Swivel Adaptor.
Integra LifeSciences Sales
MAYFIELD Horsehoe Adaptor
The MAYFIELD® Horseshoe Conversion Adapters (REF A-1109, A-1110) were designed to allow for the attachment of the Horseshoe Headrest (REF A-1011) to attach to MAYFIELD Swivel adapters (REF A-1018, A-1064, or A-2008). Also, the Horseshoe Conversion Adapter with knobs (REF A-1110) allows for the attachment of Horseshoe Headrest (REF A-1012) to attach directly to the standard 6" transitional member (REF 41B1171)
Integra LifeSciences Sales
MAYFIELD Infinity Skull Clamp
The MAYFIELD Infinity Skull Clamp is placed on the patient’s skull to hold their head and neck in a particular position when rigid fixation is desired. The skull clamp is indicated for use in open and percutaneous craniotomies as well as spinal surgery when rigid fixation is necessary. The accessories provided with the skull clamp also allow it to be used where stabilization is desired instead of complete fixation
Integra LifeSciences Sales
MAYFIELD Modified Skull Clamp
The Modified MAYFIELD® Skull Clamp (REF A-1059) is designed to give rigid skeletal fixation and allow the surgeon more freedom in positioning the fixation pins. Avoidance of critical areas of the skull is made possible by a swiveling rocker arm, which rotates 360 degrees, making application much easier. The swivel rocker arm can rotate 360 degrees under full skeletal pressure after pin impingement, making final patient positioning safer and easier
Integra LifeSciences Sales
MAYFIELD Modified Swivel Adaptor
The MAYFIELD® Modified Swivel Adaptor (REF A-1115) is designed to provide all the functionality of the standard swivel adaptor, and in addition offers a feature to tighten the fit of the ratchet extension to the body of the skull clamp, when the adaptor is used with a skull clamp. The tightened fit of the ratchet extension reduces motion that might be caused by the tolerance differences of these two components, thereby minimizing movement of the skull clamp during a surgical procedure. (In procedures such as image-guided surgery, or procedures under a microscope, minimal or no movement of the skull clamp is desired.
Integra LifeSciences Sales
MAYFIELD NeuroGen Table Adaptor
The MAYFIELD® NeuroGen Adaptor (A-1113) is designed for use as an adaptor to mount the MAYFIELD Base Unit to the operating table when the table’s receptacle holes are not appropriate or present. An adjustable end bracket allows the NeuroGen Adaptor to fit a wide variety of operating room tables. The NeuroGen can also be stored directly to the operating room table without interfering with other surgical procedures.
Integra LifeSciences Sales
MAYFIELD Pedi Horseshoe Headrest
The MAYFIELD® Pediatric Horseshoe Headrest (REF A-1051) is designed for the prone and supine positions. The MAYFIELD Ultra Base Unit (REF A-2101) is required when using the MAYFIELD Pediatric Horseshoe Headrest. This system permits both lateral and vertical mobility for positioning the patient’s head
Integra LifeSciences Sales
MAYFIELD Swivel Adaptor
The MAYFIELD® Swivel Adaptor (REF A-1018) is designed to provide greater flexibility in positioning the patient’s head by allowing rotation in 360 degrees. The MAYFIELD Ultra Base Unit (REF A-2101) with its Transitional Member is required when using the MAYFIELD Swivel Adaptor.
Integra LifeSciences Sales
MAYFIELD Triad Skull Clamp
The MAYFIELD® Triad Skull Clamp (REF A-1108) is designed to give rigid skeletal fixation, allow the surgeon more freedom in positioning the fixation pins and show indication of pin force. Avoidance of critical areas of the skull is made possible by a swiveling rocker arm, which rotates 360 degrees, making application much easier. The swivel rocker arm can rotate 360 degrees under full skeletal pressure after pin impingement, making final patient positioning safer and easier
Integra LifeSciences Sales
MAYFIELD Ultra 360 Base Unit
The Ultra 360’s (REF A-2009 and A-2029) are designed for patient positioning in the prone, supine, lateral or park-bench and sitting positions. The Support Rod spacing may be readily adjusted to fit most operating tables. The Ultra 360 connects directly to various MAYFIELD Skull Clamps and Neurosurgical Headrests; it does not require a separate swivel adaptor. A Standard Adaptor and a Tri-Star Adaptor are integral components of the system. The MAYFIELD Crossbar Adaptor (REF A-1015 or A-1016) and the Universal Siderail Fitting (REF A-1060) are required for the sitting position. The end brackets of the MAYFIELD Ultra 360 are equipped with internal isolation caps to prevent passage of stray electrical current up to 3000V. Note: The MAYFIELD NeuroGen Adaptor (REF A-1113, A-1031A. or A-1031B) may be required for those tables not designed to accept base units
Integra LifeSciences Sales
MAYFIELD Ultra Base Unit
The MAYFIELD® Ultra Base Unit (REF A2101 or A2102) is designed for patient positioning in the prone, supine, and sitting positions. The MAYFIELD Ultra Base Unit can be easily readjusted to fit most operating tables. It is used in conjunction with the MAYFIELD Ball Socket Swivel Adaptor (REF A1064), the MAYFIELD Swivel Adaptor (REF A1018), or the MAYFIELD Tri-Star Adapter (REF A2008) for attachment of various MAYFIELD Neurosurgical Headrests and Skull Clamps. The MAYFIELD Crossbar Adaptor (REF A1015 or A1016) and the MAYFIELD Universal Side Rail Fitting (REF A1060) are required for the sitting position. The End Brackets of the MAYFIELD Ultra Base Unit are equipped with internal isolation caps to help provide insulation against stray electrical current. NOTE: The MAYFIELD Neurogen Adaptor (REF A1113) may be required for those operating tables not designed to accept the MAYFIELD Ultra Base Unit. (REF A2101 or A2102). The MAYFIELD Ultra Base Unit (Fig. 1), is supplied with an Adjustment Wrench (REF 41A1284), and a 6” Transitional Member (REF 41B1171).